How to Make a Simple, Low-Cost Solar Power Generation System?

As we all know that solar energy is an inexhaustiblein parallel to increase the current power of the
green energy, about 40 minute-solar energy exposinggeneration set. And then, install the fixed power
on the Earth is sufficient for the energy consumptiongeneration panels to the metal plate, and install two
of the world for one year. The application of the solarsets of power generation groups to different positions
energy in the large-scale can not only solve the current(in order to absorb the sun light well. Because of
energy crisis, but also can save our electricitylow-cost, we can't make the sunlight-tracking system
expenditure. Anyway, do not think that the applicationand it is a little difficult to make it).
of the solar energy is far away from our daily lives. AtStep Two: Connect the electrode leads of the power
present, it is not difficult to find the solargeneration set to the positive and negative electrodes
energy-charged cell phone in mobile phone products.of the storage battery, so that the storage battery can
And there are also solar chargers, solar lamps, solarcontinuously get the charging energy (in order to
bus stops, etc in our daily lives. Other applications ofprotect the battery, the overcharge or over-falling
the solar system such as solar water heaters, solarprotection system can be added). Then wire two sets
air-conditioning, and solar cook stoves and so on areof storage batteries in parallel to increase the current
also very frequently used.of the battery.
The following is a simple, low-cost solar powerStep Three: Next, we need to convert 12V DC to our
generation system designed by us.appliances used 220V AC, which will require the
Materials: Several 6V or 12V single crystal silicon solarinverter. Connect the battery power leads to 220V
generating panels (10-50 blocks, according to theinverter.
demand of the usage) Two 6V or 12VFinally, after the conversion of the adequate sunlight,
maintenance-free storage batteries One 220V inverterthe power connected by the inverter can be used for
Above are all we need.domestic lighting equipment.
Step One: We need to divide the solar panels into twoThis system is very flexible, you can increase the solar
groups, if it is the 6V generating panels; we need topanels and batteries to obtain more energy, so that
wire two panels in series to raise the voltage up toyour computer, televisions, refrigerators and even air
12V, and others also need to be wired in series as theconditioning can be carried out through the solar
first two pieces, and then wire those groups of panelsenergy.