| Solar photovoltaic requires proper solar power | | | | And lastly, Amorphous or thin film photovoltaic panels- |
| installation training skills with electrical wiring; it cannot be | | | | they are the cheapest and can be made to be quite |
| done by anyone without the specific trained skill to do | | | | flexible. This type of panel is a durable panel that uses |
| so. If it is badly installed or is damaged, it may lead to | | | | less silicon and energy to manufacture but degrades |
| electrocution or fire. It is used during cold climates but is | | | | faster and has the lowest efficiency. It also requires |
| dependent on sunlight. Solar thermal on the other hand | | | | more space to produce the same amount of energy. |
| is a lot easier and cheaper to utilize but can only be | | | | The advantage of utilizing solar power in the |
| used in certain types of climates. | | | | environment is that no carbon is emitted into the air. |
| There are three main types of solar panels that are | | | | People would also depend less on the fluctuating |
| available at present, and they are: | | | | market energy and power efficiency. The |
| Monocrystalline photovoltaic panels- these are the | | | | disadvantage, however, is that solar power energy |
| most efficient solar panels especially in low light. This | | | | needs sunlight to work, thereby they produce more |
| type is more durable, thinner and requires less space; | | | | energy during day time especially in summer, but does |
| however, this type of solar panel is the most | | | | not produce power at night. During cloudy day or |
| expensive, rigid and uses more silicon and energy in | | | | during the winter season, the output of solar power |
| the production process. | | | | energy is reduced to its lowest. |
| Multicrystalline or polycrystalline photovoltaic panels are | | | | That being said, it is up to you to decide whether or |
| cheaper than monocrystalline and have higher | | | | not you want to install solar power energy. If you do |
| efficiency than thin film but is rigid compared to | | | | decide to take advantage of it, remember that it is |
| monocrystalline and contains lower efficiency. It is also | | | | best to seek the help of professionals when installing |
| more expensive compared to thin film. | | | | such complicated and powerful work. |